Winter special: 15% off your first deep clean

Book now
Floor being cleaned in a bright home

Cleaning · Toronto & GTA

Post-Construction Cleaning in Toronto

Renovation dust gets everywhere. We remove fine dust, light debris, paint specks and adhesive residue so your renovated home, new build, unit or commercial space is ready to move into or hand over, on your project schedule.

Serving Toronto, Etobicoke, North York, Scarborough, Mississauga, Brampton, Caledon, Vaughan, Thornhill, Markham and the rest of the GTA.

From job site to move-in ready

When the trades pack up, a renovated space still is not ready to live or work in. Drywall dust sits on every ledge, inside every cabinet and deep in the vents. Paint specks dot the floors and trim, sticker and adhesive residue covers windows and new fixtures, and a grey film settles on everything a day after you think it is clean. Construction dust is also very fine, which is why a normal clean or a household vacuum just moves it around.

MC Services provides post-construction and renovation cleaning across Toronto and the GTA for homeowners, general contractors, builders, property managers and businesses after a fit-out. We work to your project schedule, bring the right equipment for fine dust, and leave the space ready for move-in, handover or opening day. Our team is insured and covered by WSIB, which most contractors and property managers require on site.

What our post-construction cleaning includes

  • Fine dust removal: every surface, ledge, shelf, sill, door top and frame wiped with damp microfibre; walls dusted top to bottom
  • Vents and fixtures: vent covers, return grilles, light fixtures, switches and outlet covers cleaned
  • Cabinets and drawers: inside and out in kitchens, bathrooms, closets and built-ins
  • Windows and glass: stickers, labels, paint and adhesive residue removed from glass and frames; sills and tracks vacuumed and wiped
  • Bathrooms: new tubs, showers, tiles, grout haze where safe, toilets, vanities, mirrors and fixtures cleaned and polished
  • Kitchen: inside and outside of new appliances, counters, backsplash and sink; protective film removed where you want it
  • Floors: vacuumed with fine-dust filtration, paint specks and residue removed, then washed with a product suited to the floor
  • Light debris: packaging, offcuts and small debris bagged and removed (bulk waste and bins stay with the contractor)

The three stages of construction cleaning

On larger projects, one clean at the end is not always enough. We can work in stages:

  1. Rough clean: after drywall, painting and the messiest trades finish. We remove debris and the heaviest dust so finishing trades work in a cleaner space.
  2. Final clean: after all trades are done. The full checklist above, top to bottom and inside everything.
  3. Touch-up clean: just before move-in, handover, photos or opening day, to remove dust that settled after the final clean and marks from last-minute work.

Small renovations, such as a kitchen or a bathroom, usually need only the final clean. New builds, full-house renovations and commercial fit-outs benefit from all three.

For homeowners after a renovation

You have lived with dust and noise for weeks or months. The last thing you want is to spend your first weekend in your new kitchen scrubbing paint off the floor. We clean the renovated area and the rest of the home where dust travelled, which is usually more of the house than you expect: stairs, hallways, bedrooms and the HVAC registers.

Tip: change your furnace filter after the renovation and again a few weeks later. Fine dust keeps circulating through the ducts until the filter catches it.

For contractors, builders and developers

A clean handover reflects on your work. We clean homes, condos and units before handover, model homes before showings, and commercial units before tenants move in. We can:

  • Work around your schedule, including evenings and weekends before a deadline
  • Clean several units in a building or a phase of a subdivision
  • Send photos of finished units if you are not on site
  • Provide proof of insurance and WSIB coverage for your site file

New subdivisions in Brampton, Milton, Vaughan, Pickering and Oshawa keep builders and new owners busy; we clean across all of them.

For businesses after a fit-out

Offices, clinics, restaurants and retail stores need to be spotless before staff and customers arrive. After the final clean, our commercial and office cleaning team can take over with regular service, so you deal with one company from fit-out to day-to-day cleaning.

Before we arrive: a checklist for contractors and homeowners

A final clean goes faster and better when the site is ready for it. Before the clean, please make sure:

  • All trades are finished in the areas to be cleaned, including touch-up painting and caulking.
  • Bulk waste, offcuts, bins and tools are removed from the space.
  • Water and power are on, and the lights work, so we can see the dust.
  • Protective film and floor protection you want removed are pointed out; leave in place anything that should stay until move-in.
  • The HVAC filter is new, or will be changed after the clean.

Common mistakes after a renovation

  1. Cleaning too early. If trades are still sanding or painting, the dust comes straight back. Book the final clean for after the last trade leaves.
  2. Dry dusting. Feather dusters and dry cloths throw fine dust into the air, and it settles again an hour later. Damp microfibre and HEPA vacuums capture it.
  3. Using the household vacuum. Drywall dust clogs ordinary filters and can burn out the motor, while the finest particles blow straight out of the exhaust.
  4. Scraping glass with the wrong tool. Paint and adhesive on windows need the right blade, angle and lubricant, or the glass scratches.
  5. Forgetting the vents and ducts. Dust hides in registers and returns and keeps coming out for weeks. Clean the covers, change the filter, and consider a duct cleaning after a large renovation.
  6. Skipping inside the cabinets. New cabinets collect sawdust and drywall dust inside, which ends up on your dishes.

What post-construction cleaning costs

Our rate is $35–$40 per hour. Post-construction cleaning is usually quoted after we see the space or photos, because the time depends on:

  1. Size of the area and how much of the rest of the home was affected by dust.
  2. Type of work done: drywall sanding and flooring create far more fine dust than painting alone.
  3. Residue: paint, plaster, grout haze and adhesive on glass and floors.
  4. Number of stages: rough, final and touch-up cleans.
  5. Cabinets and appliances to be cleaned inside.

Send us photos and the size of the space on WhatsApp at 647-921-1060 for a free estimate. For more on pricing, see cleaning prices.

Safety on site

Construction cleaning has hazards a regular clean does not: nails and screws on the floor, sharp offcuts, unfinished stairs and electrical work still being finished. Our team wears appropriate footwear and gloves, does not touch live electrical work, and follows any site rules from the contractor. We use HEPA-filtered vacuums where fine dust is heavy, because ordinary vacuums blow the finest particles back into the air.

Why choose MC Services for construction cleaning

  • Insured and WSIB-covered, with proof available for your site file.
  • Fine-dust methods that actually remove dust instead of moving it around.
  • Works to your schedule, including tight handover deadlines.
  • Homes, condos and commercial spaces across Toronto and the GTA.
  • One company for what comes next: regular house cleaning, carpet cleaning, window cleaning or office cleaning.

How to book

  1. Send details or book online. Tell us the type of work, the size of the space and your deadline on our booking page or by WhatsApp.
  2. Estimate and schedule. We give you a clear estimate and book the clean for when the trades are done.
  3. Clean and walkthrough. We clean to the checklist, walk through with you or send photos, and touch up anything you spot.

Frequently asked questions

When should post-construction cleaning be booked?

Book it once the trades have finished. On longer projects we can do a rough clean during the work and a final clean at the end.

Do you work with contractors and builders?

Yes. We clean homes and units before handover and work to your project schedule. We can provide proof of insurance and WSIB coverage.

Do you remove construction debris?

We remove light debris and packaging. Bulk waste and bins should be cleared by the contractor before the final clean.

How long does a post-construction clean take?

A single renovated room may take a few hours; a full new home can take a full day or more with a team. We give you the expected time with your estimate.

Can you remove paint and adhesive from windows and floors?

Yes. We remove paint specks, stickers and adhesive residue from glass, frames, tile and hard floors using methods that do not scratch the surface.

Why does dust keep coming back after the clean?

Fine dust stays in the air and the ducts for a while after the work. Run your HVAC with a fresh filter, change it again after a few weeks, and book a touch-up clean before you move in if the final clean was done early.

Do you clean commercial spaces after a fit-out?

Yes. We clean offices, clinics, restaurants and retail units after fit-outs, and can continue with regular commercial cleaning.

Are your cleaners insured?

Yes. Our team is insured and covered by WSIB.

Should I clean the ducts after a renovation?

After a large renovation with drywall sanding, it is worth having the ducts cleaned by a duct-cleaning company and changing the furnace filter. We clean the vent covers and returns as part of our clean.

Watch · @mcscleaning.to

3 cleaning secrets from a pro

See how MCS cleans in short videos from our TikTok and Instagram. Follow @mcscleaning.to for more cleaning tips and before-and-afters.

Ready for spotless?

Book online in about a minute, or message us on WhatsApp for a free estimate.